Car dents

Car body dent repair, removal, and fix at Cross Lane Autos NW10 7ED Telephone 02036383478
Car door, quarter, wing dents repairs

Car body dents repair and removal

Dents are damages to your car body panels due to several factors such as acidic rain fall, vandalism, or driver mistake. Dents differ in types such as smooth, large, creased, small, door panel dent, bonnet dent, and dent in roof panel. These type of damages on car panels would depreciate the car market value and without doubt, a vehicle will look non-presentable.

In case of severe dent, an alternative option is to replace the whole panel like replacing very deformed wing with a new one. Dent removal require a certain multi-repair stages process in order to make the wing, or door surface even and flat. It depends on the severity level of the damaged part of a car body to decide the repair method or, replace option. 

Smooth Dents

Caused by a person leaning on the car body so, metal will be pushed inward, in effect. This can be easily rectified through paint-less dent removal smart repair.

Large Dents

This is large as the panel where less deformation to the affected spot centre and might have creased edges as well. Cross Lane Autos body shop can fix it.

Creased Dents

Result of an object striking panel at sharp angle and deforming the metal. This creasing can be rectified if, it is not enormous.

Door Panel Dents

Very common and caused by other car opening door striking your vehicle one or, it might be a reversing car into your door panel. Non-repairable if, it is severe.

Bonnet Dents

These are a consequence of road users driving in front of your car and causing stones to be thrown in the air and landing on car’s front hitting especially, the bonnet.

In case of severe dent, an alternative option is to replace the whole panel and apply paint coat spraying on the panel. Dent removal require a certain multi-repair stages process in order to make the wing, or door surface even and flat. Cleaning the damaged spot, pulling the surface outward, grinding the paint off, apply body filler to achieve a smooth area, sanding the filler to make it even surface and later on, after the drying of the filler, it must be sanded, cleaned with water and primed for the paint spraying stage. It might look like a very difficult repair job. However, to the well trained and experienced panel beater, this body dent repair task is a daily routine. Only a good body garage can offer this service at a high quality.